Installation Tutorial
Pendant Mounted

01
Measure distance and use an electric drill to fix it.

02
Screw the plastics anchor and the screw eye hook.

03
Choose a right position to suspend the chain, and cut the extra that unneeded.

04
Fix the light with spring snap and link the shop lights in series. Maximum 4pcs.
Surface Mounted

01
Measure distance and use an electric drill to fix it.

02
Screw the plastics anchor and the screw eye hook.

03
Insert the screw into the holes of the shop light and link the shop lights in series. Maximum 4pcs.
Download Attachments
FAQ
-
Our lights can be used outdoors, but they cannot directly contact water. In other words, they cannot be directly exposed to rain.
Yes, our lights are energy-saving. 4400 LM consumes only 36 watts. Based on 3 hrs /day and 11¢/kwh, the estimated energy cost is $4.73.
Yes, our lights are 4400 lumens output. It has high brightness. With 120° beam angle, the led shop light instantly brightens up your house.
You could link 4 light fixtures together at most. If too many lights are connected, the wires may heat up, and the lights may burn out for a long time.
No, our led shop light is not dimmable. You could not use a dimmer to adjust its brightness.
The Operating Temperature: -10°C (14°F) – 40°C (104°F).
To ensure the brightness of the lighting, we recommend that you install the light at a height below 2.5m from the floor. At the same time, the luminous range of one led shop light is about 96.88 ft². However, because the light is a long strip, the actual luminous range may be different. This can only be used as a reference. In addition, the distance between them also depends on the layout of your room and your personal preference.
Our LED shop light is suitable for various places, such as garage, warehouse, basement, workshop, workbench, hallways, schools, laundry room, utility room and recreation rooms, office general lighting. It has wide application.